Toggle sidebar Toggle sidebar

Search results

  1. A

    Wanted - CSR 826 AMC Proflite -Torqueflite transmission super shield

    I am looking for a CSR 826 AMC Proflite -Torqueflite transmission/flexplate super shield, Part # 826. Does not have to be in cert, can be expired but needs to be in good condition with strap etc. PM me here thanks.
  2. A

    ISO: CSR 826 shield

    Need a CSR 826 shield, for an A1 Proflite. Needs to be complete and in good condition, does not need to be in cert, can be expired, please PM here thank you.
  3. A

    ISO: CSR 826 shield

    Need a CSR 826 shield for an A1 Proflite. Does not need to be in cert, can be expired. Needs to be complete (with the strap) and in good condition. PM here please.
  4. A

    New Mid Deck iron blocks

    Anyone on here interested in brand new mid deck cast iron blocks? Not the short deck, but mid deck height.
  5. A

    Wanted K&N 100-8507 teardrop scoop

    Anyone have one for sale to ship to California?
  6. A

    Wanted: Racepak intelligauges

    After a Racepak Intelligauge for sale? Oil temp. If so please post on here or PM me what you have. Need actual part number (on the back) please to know its the correct one, thanks
  7. A

    Racepak Intelli-gauges

    Anyone have some Racepak intelligauges for sale/ Need part numbers of what you might have thanks
  8. A

    WTD: Racepak Intelli-gauges, white faced

    We are looking for these five Racepak Intelli-gauges (maybe someone has them that has upgraded to a Racepak Digital dash), all White-face needed: 250-IG-120WB -Water temperature, race, 60 degrees F to 200 degrees F (not street-100F to 280F) 250-IG-130WB -Oil temperature, 140 F to 280 F...
  9. A

    SOLD-New GRP rods, Pro Series, set of 10

    -GRP Rods, SB Chev, brand new in box, 2 spares -10 of total -Series: 1400-PRO -Big end journal diameter: 2.0152” (Bearing is 1.888”-Honda) -Width: 0.940” -Wrist pin diameter: 0.927” (PF) -Pin width: 1.150” -Center to Center length: 6.170” $700, mailed to any US State. [email protected]
  10. A

    ProHydro Vs ProFlite

    Putting a Comp deal together for someone over the pond over here. Car is 2900 lbs wet, can only use a 3 speed auto, around 650HP. Was looking at getting them a ProHydro (TH350 based) from Coan, the XLT-350, part #:COA-131150, at $6,195...
  11. A

    WTD: Koni shocks with sweeps

    Looking for some electric Koni rear alum double adj shocks complete with (Yellow box) sweeps & wiring harness, complete setup. Dont need springs. Let us know what you got and $.
  12. A

    Anyone going from Florida to Los Angeles?

    Have a buddy over here who needs a 225" dragster hauled from Florida (20mins from Garlits shop) to Los Angeles. Anyone who might be able to do it for $$ ? If so, I'll pass his email and contact details over. Turn-key deal.
  13. A

    Wanted: Gebler SB headers

    Anyone got some, stainless, Tri-Y ? 15/18/23 degree SB. Suit chassis or non chassis car, doesn't matter. Looking for a friend, who wants them. Post here please if you do.
  14. A

    Winberg 2.85" crank, new in box

    Winberg crank, Billet ‘Ultra-light’, 6 counterweight (no center counterweights), stroke: 2.850”, main journals: ‘283’ (Chev SB small journal), 2.2985”, rod journals: ‘Honda’ size, 1.8882” , bobweight: 1420 grams, brand NEW in box, $2,000 obo, including shipping to lower 48 states. PM here.
  15. A

    New GRP Pro Series rods-SBC-10 of

    -GRP aluminum rods -10 of -Suit SB Chev (0.940" width) -1400 PRO Series -Honda big end (2.0152" big end bore, 1.888" bearing) -0.927" pin (pin width 1.150")- PF -Rod length 6.170" Full set set of 8 plus 2 spares = 10 Brand new in box Cost over $1,200. Best reasonable offer, postage to any...
  16. A

    Winberg Ultra Light crank-2.850 stroke-New

    -Winberg Billet ‘Ultra-light’ -6 counterweight (no center counterweights) -Stroke: 2.850” -Main journals: ‘283’ (Chev SB small journal), 2.2985” -Rod journals: ‘Honda’ size, 1.888” -Bobweight: 1420 grams. -Brand New -Postage paid by us anywhere within the USA -$2,200 PM us or...
  17. A

    If you want to listen to Aussie Pro Stock live..

    If you guys want to listen to ANDRA Pro Stock live, online with todays track audio, round one begins at about 7.30pm Pacific Standard Time (10.30pm EST), 12.30pm here. Click onto: http://energy08.egihosting.com/18321 or go to www.wsid.com.au and click on the audio link at the left of the...
  18. A

    Pit Mats info

    We are trying to find out who manufacturers this particualr Pit Mat. We thought it was Hartman Enterprises, but now dont think so. Bernstein and others use it. Rolls up, durable, not plastic sheeting. Anyone know who makes/sells it?
  19. A

    Fuel sensor

    Found what I was looking for thanks.
  20. A

    Wanted: Gebler or Elston Tri-Y's, SB

    We are after a set of Gebler or Elston Tri-Y headers, suit 23 degree Small Block Chev, in a SM type car (backhalf deal) for Comp elim (G8 Pontiac). If they have EGT & 02 sensors, even better, if not, thats OK too. Please PM us here. Thanks.
Top Bottom
Back