Search results

Lamb carbon front brakes for Lamb struts (used) - complete kit - $2,500 Lamb carbon rear brakes (used) - calipers, pads, and rotors only - $2,000 Koni rear electric shocks (old version) - shocks, springs (95#), harness, timer and yellow Koni knob box - $750 Hoosier 24x5.0-15 fronts, used -...

We plan to continue the D5 Comp Bonus Fund in 2024 and hope you will continue your support or become a sponsor. In discussions with sponsors, we have decided to have 2 levels of sponsorship opportunities – $500 sponsorship level – This level will be the same as we did in 2023. Your logo will...

SOLD!!!!!

RAM 8" Billet Clutch complete with 153 tooth 3 disc flywheel, comes with spare 142 tooth 2 disc flywheel, 13 spare discs (some used), 5 spare floaters (some used), dial indicator, Ram counterweight kit and scale, and spare fingers, springs and stand bolts. Came out of an A/A. $4,000 plus...

- Liberty Equalizer transmission complete with shifter - gear ratios appear to be 2.60, 1.91,1.50,1.23,1 (based on Racepak data), out of A/A - $7,500 (plus shipping) - Liberty Gears - $350 each (plus shipping) 28x15 30e16 30x15 26e18 25x18 27x19 28x18 24x17 24x21 25x20 22x19 22X22 22E23 20X25...

-Donovan 5” Bore Space Block (10.505” Deck Height/1” Raised Cam/60MM Roller Cam Bearing) -Callies Ultra Billet 5” Bore Space/5” Stroke Crankshaft -GRP Aluminum Pro Series Connecting Rods -Diamond Pistons w/ Trend DLC Coated Wrist Pins -Total Seal Rings (.032” .032” 3.0MM Package) -Clevite Coated...

SOLD!!!

- Bickel bearing collar part #JBRC5720, threaded for sensor, new $75 - (3) Bickel bearing collar part #JB5721, threaded for sensor, used $50 each - Victory Titanium valves, used, 5.55 OAL, ran in Slawko heads, $200 - BME pistons from 316SBC, 4.060 bore with pins, approx. 60 runs, $200 -...

2005 Chevrolet Cavalier ran since 2019 as D/SMA Purchased in 2017. Everything replaced on the car except the main body. Not a single part on the car is the same as when it was purchased in 2017. Lamb front and rear brakes Mark Williams axles Penske Racing shocks Strange front struts redone...

Trick Titanium Bell Housing 8 5/8" depth Certified til 4/2025 Setup for jerico, liberty, or lenco Comes with clutch fork, throwout bearing, bearing collar and Racepak Clutch Sensor SOLD!! Call Michael at 417-437-1669.

8" Billet Ram Clutch w/ 153 Tooth 3 Disc Flywheel (complete setup) 142 Tooth 2 Disc Flywheel 13 Spare clutch disc's (some used) 5 floaters (some used) Dial Indicator Ram counter weights and scale Spare fingers, springs and stand bolts 5500 ОВО Call Michael at 417-437-1669.

2005 Chevrolet Cavalier ran since 2019 as D/SMA Purchased in 2017. Everything replaced on the car except the main body. Not a single part on the car is the same as when it was purchased in 2017. Lamb front and rear brakes Mark Williams axles Penske Racing shocks Strange front struts redone...

I am happy to announce the top 5 points earners and year end payout for 2023 for the D5 Comp Bonus Fund. As was detailed throughout 2023, all excess funds not paid to the racers at each race would be accumulated and paid at year end. The total accumulated throughout the year was $8,550. I...

In the final race of the Division 5 season, Matt Harris driving the Harris Race Cars E/A Pontiac Grand Am tuned by Bill Harris took the win over Jim Greenheck in his CTECH Manufacturing C/AA Camaro. Christine Harris Samuel was the #1 qualifier at .688 under the index in her H/A Grand Am to edge...

What a doozy of a weekend in Topeka! We had rain, wind, and temperatures above 100 for the vast majority of the time. Thankfully the schedule was adjusted to try and keep cars off the track during the worst part of the day. Thank you to the staff at NHRA and Heartland Park for working hard to...

As mentioned in a previous post by Mike Foster from Foster Racing, what an incredible weekend for the Harris Family. 2 wins and 2 #1 qualifiers for a sweep of the weekend! In race #1 of the weekend, Matt Harris driving the Harris Race Cars E/A Pontiac Grand Am tuned by Bill Harris took the win...

Race 1 of Division 5 kicked off in Earlville, IA on Friday, June 2nd. It was a very warm and humid day on Friday with rain shortening the qualifying sessions. Saturday proved to be a little better humidity wise with Jim Greenheck taking top qualifier honors in his CTECH Manufacturing B/EA...

With the first race fast approaching for Division 5, I am excited to announce the rules, payout, and tiebreakers for the D5 Comp Bonus Fund. As I stated when I setup this fund, I wanted 100% of the funds to be paid out to the racers. This promise holds true as the payout structure has all...

I am in the early stages of planning a D5 Comp Bonus Fund for 2023. My hope is to get the commitment of 20 companies/individuals at $500 each for a total payout of $10,000. Once those 20 companies/individuals have committed, I plan to poll those companies/individuals and come up with how the...

- (2) Stroud Window Nets, angled for EastTexas Cavalier, uncertified, $25 - Bickel bearing collar part #JBRC5720, threaded for sensor, new $75 - Bickel bearing collar part #JB5721, threaded for sensor, used $50 - Bickel bearing collar part #JB5721, threaded for sensor, new $75 - Victory...